The IR48751/S/P is a 48-inch Wolf induction range: seven induction elements above a convection oven, with no gas connection anywhere in the appliance. Each element has its own coil and its own pan-detection sensing, so a fault usually shows up on one zone rather than across the whole surface.
Induction elements on the IR48751/S/P sit above power boards that generate real heat of their own and depend on cooling airflow. A cooktop that works fine for ten minutes and then drops out is a classic thermal-shutdown pattern rather than a dead coil.
The designation itself is most of the spec sheet: IR for Induction Range, 48 for the cabinet width in inches, 7 for the seven induction elements, the 50 or 51 before the option letters for the control generation and S/P for a stainless front with Professional handles.
Key Features
- 48-inch induction range with seven induction elements
- Electric convection oven below the cooktop, with no gas supply to the appliance
- Per-element pan detection, so an unrecognised pan and a failed element look alike from the front but are not
Most Common Issues on This Model
An induction element does not recognise cookware placed on it
Touch controls unresponsive, or responding to the wrong zone
Cooktop or a single element cuts out part-way through cooking
Oven will not reach the set temperature, or bakes unevenly