The IR30451/S/P is a 30-inch Wolf induction range: four induction elements above a convection oven, with no gas connection anywhere in the appliance. Each element has its own coil and its own pan-detection sensing, so a fault usually shows up on one zone rather than across the whole surface.
When the IR30451/S/P shows a fault code, note it before cycling power — the induction line’s codes distinguish an element-side problem from a control-side one, and a code that clears on a power cycle and then returns tells us more than one that was never written down.
For anyone matching parts or a replacement, the number reads as IR for Induction Range, 30 for the cabinet width in inches, 4 for the four induction elements, the 50 or 51 before the option letters for the control generation and S/P for a stainless front with Professional handles.
Key Features
- 30-inch induction range with four induction elements
- Electric convection oven below the cooktop, with no gas supply to the appliance
- Per-element pan detection, so an unrecognised pan and a failed element look alike from the front but are not
Most Common Issues on This Model
An induction element does not recognise cookware placed on it
Touch controls unresponsive, or responding to the wrong zone
Cooktop or a single element cuts out part-way through cooking
Oven will not reach the set temperature, or bakes unevenly