Wolf Range

Wolf DF60650CG/S/P

Model # DF60650CG/S/P

The DF60650CG/S/P pairs six open burners alongside an infrared charbroiler and an infrared griddle on a 60-inch gas cooktop with an electric convection oven below — the combination Wolf sells as Dual Fuel, chosen because gas gives instant flame control on top while an electric cavity holds a steadier baking temperature.

Older Dual Fuel controls report numeric faults rather than plain text, and the DF60650CG/S/P shares that set — codes in the 01 to 0E range, plus PF after a power interruption and LOWER RELAY on double-cavity logic. The code narrows the search; it does not by itself name the part. The infrared charbroiler is its own heating assembly with its own burner and igniter, so a charbroiler that will not light says nothing about the open burners beside it. The infrared griddle is a separate heated surface with its own burner and control, and a cold spot on it is a griddle-side diagnosis rather than a cooktop one.

Read the number back and it describes the appliance: DF for Dual Fuel, 60 for the cabinet width in inches, 6 for the six open burners, C for the infrared charbroiler, G for the infrared griddle and S/P for a stainless front with Professional handles.

Key Features

  • 60-inch Dual Fuel range: six open burners alongside an infrared charbroiler and an infrared griddle on gas, electric convection oven below
  • Sealed surface burners with spark ignition, each valve switched independently
  • Wi-Fi-capable control generation, identified by the 50 in the model number
  • Separate charbroiler assembly with its own burner and control

Most Common Issues on This Model

01

Surface burner clicks continuously but will not light

02

Oven side will not reach temperature while the cooktop works normally

03

Uneven baking, or a convection fan that is noisy or silent

04

Display shows one of the Dual Fuel line's numeric fault codes

05

Charbroiler will not heat, or heats unevenly across its surface

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

FAQ

Wolf DF60650CG/S/P FAQ

Write the code down and book it. A code that clears on its own has still been logged by the control for a reason, and knowing which one appeared lets a technician arrive with the right part rather than diagnosing from scratch.

A small amount of variation across a large infrared griddle is normal, but a distinct cold zone that does not move usually means the griddle burner is not firing evenly, and that is worth having looked at.

Need a repair? We're ready to help. Call Now
Call Us Schedule