The DF48650C/S/P is the 48-inch Dual Fuel configuration with six open burners alongside an infrared charbroiler. Because the gas manifold and the oven’s high-voltage heating circuit sit in the same chassis, a proper diagnosis checks both systems independently instead of assuming one explains the other.
Older Dual Fuel controls report numeric faults rather than plain text, and the DF48650C/S/P shares that set — codes in the 01 to 0E range, plus PF after a power interruption and LOWER RELAY on double-cavity logic. The code narrows the search; it does not by itself name the part. The infrared charbroiler is its own heating assembly with its own burner and igniter, so a charbroiler that will not light says nothing about the open burners beside it.
Wolf numbers are descriptive rather than arbitrary, and this one decodes cleanly: DF for Dual Fuel, 48 for the cabinet width in inches, 6 for the six open burners, C for the infrared charbroiler and S/P for a stainless front with Professional handles.
Key Features
- 48-inch Dual Fuel range: six open burners alongside an infrared charbroiler on gas, electric convection oven below
- Sealed surface burners with spark ignition, each valve switched independently
- Wi-Fi-capable control generation, identified by the 50 in the model number
- Separate charbroiler assembly with its own burner and control
Most Common Issues on This Model
Surface burner clicks continuously but will not light
Oven side will not reach temperature while the cooktop works normally
Uneven baking, or a convection fan that is noisy or silent
Display shows one of the Dual Fuel line's numeric fault codes
Charbroiler will not heat, or heats unevenly across its surface