Wolf Range

Wolf DF486G

Model # DF486G

Wolf’s DF486G is a 48-inch Dual Fuel range with six open burners alongside an infrared griddle. Gas feeds the cooktop through sealed burners and spark ignition; the oven below is electric, with convection fans and a temperature sensor feeding an electronic control.

The DF486G’s oven uses convection, so uneven baking is worth separating from no-heat. A cavity that heats but browns unevenly often traces to a convection fan motor or a sensor reading slightly off, while a cavity that never warms is an element or relay question. The infrared griddle is a separate heated surface with its own burner and control, and a cold spot on it is a griddle-side diagnosis rather than a cooktop one.

Wolf numbers are descriptive rather than arbitrary, and this one decodes cleanly: DF for Dual Fuel, 48 for the cabinet width in inches, 6 for the six open burners and G for the infrared griddle.

Key Features

  • 48-inch Dual Fuel range: six open burners alongside an infrared griddle on gas, electric convection oven below
  • Sealed surface burners with spark ignition, each valve switched independently
  • Pre-Wi-Fi electronic oven control that reports faults as short numeric codes
  • Separate griddle assembly with its own burner and control

Most Common Issues on This Model

01

Surface burner clicks continuously but will not light

02

Oven side will not reach temperature while the cooktop works normally

03

Uneven baking, or a convection fan that is noisy or silent

04

Display shows one of the Dual Fuel line's numeric fault codes

05

Griddle will not heat, or heats unevenly across its surface

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

FAQ

Wolf DF486G FAQ

No — it is one appliance and one visit. A technician working on it isolates the electrical supply at the breaker and shuts the gas off at the appliance valve before working near the manifold, then diagnoses both halves in the same call.

A small amount of variation across a large infrared griddle is normal, but a distinct cold zone that does not move usually means the griddle burner is not firing evenly, and that is worth having looked at.

Need a repair? We're ready to help. Call Now
Call Us Schedule